Studio
Roof tank and pump automation that never runs dry
The studio roof tank fills automatically with a failsafe off; the pressure pump runs in a timed window; neither restarts blindly after load-shedding.
Roof tanks and pressure pumps are easy to ignore until the upstairs taps run dry — or until an overflow stains a neighbour’s ceiling. Automation here is not glamorous. It is daily reliability.
What runs in the studio
In the Experience Studio at DHA Phase 5, Lahore:
- The roof tank fills automatically using the pump, with a failsafe off.
- The pressure pump runs in a 20-minute window rather than hunting endlessly.
- Pumps do not restart on their own after load-shedding.
A simple wall view shows tank status so you are not guessing. You can see the live water dashboard on our Experience Studio page.
How we’d set this up in your home
- Survey the water path — underground or street supply, roof tank, pressure pump, and where sensors can sit safely.
- Define failsafe behaviour — what must never stay on, and who gets an alert if a fill takes too long.
- Tie water into the same home controller as lighting and security so one UPS-backed brain covers the outage story.
- Test with you present — fill, stop, pressure window, and a simulated power return.
If you’d like flow and pump run-time on your dashboard, we add a flow meter and log it from day one.
Related reading
Visit the studio
See the water card and the power-return act together. Book a studio visit at DHA Phase 5, Lahore.
Catalogue
Products in this story
UE-SC-02
DIN-Rail Relay Controller
8- and 16-channel DIN-rail relay controllers for distribution boards. Clean walls, central control.
UE-SN-04
Motion Sensor
Motion sensors for lights that follow you, security alerts and empty-room AC shut-off.
UE-SC-01
10-inch Wall Control Screen
Large in-wall touchscreen to see and control the whole home.
Before you ask
Can this work with my existing pump and float switches?
Often yes. We assess the pump, sensors and electrical board during the site survey and keep what is sound.
What happens during load-shedding?
The controller stays on UPS. Pumps do not restart on their own when the grid returns; fill and pressure follow the rules we set with you.
Next step
Plan your home project
Start with the Home Planner, or book a free site assessment — visits to the Experience Studio by invitation.
About
Ultra Edge Experience Studio
We design, supply, install and support automation that runs on site — for homes, buildings, industry and farms across Pakistan. The Experience Studio at DHA Phase 5, Lahore is a working home where we measure real behaviour through load-shedding, heat and daily use. Visits are by invitation.
Keep reading
Related reading
Studio
When power returns: geysers and pumps should wait
When the grid returns, the studio does not slam every load on at once. Geysers and pumps stay off until schedules say otherwise — so the house recovers calmly.
Studio
Curtains that cut your AC bill in a Lahore home
In our DHA Phase 5 studio, living and dining curtains close when the sun hits the glass, log the heat they block, and still respect you when you move them by hand.
Studio
One remote for the whole house: a 4-button control
A four-button wall remote in the studio cycles living scenes, runs curtains, guest and outdoor modes, and Off to Bed — without asking anyone to open an app.